Series BAT Blind Analog Transmitter

Blind Analog Transmitter
Converts Pulse Frequency to 4 to 20 mA, Loop Powered

Converts Pulse Frequency to 4 to 20 mA, Loop Powered

The SERIES BAT Blind Analog Transmitter is a 4 to 20 mA transmitter for use with the Series EFS2, IEFS, PDWS, PFT and FLMG.

Product Applications

Model Chart

EXAMPLE	BAT	M	PC4	Series BAT-M-PC4 Blind Analog Transmitter, meter-mounted with metering pump 4-pin connector.
SERIES	BAT			Blind Analog Transmitter
MOUNTING		M W		Meter-mounted Wall-mounted
OPTIONS			PC4 PC5	Metering pump 4-pin connector Metering pump 5-pin connector

Input: Open-collector solid state sensor. Averaging: 2, 4, 8, 16 s (DIP switch selectable); Pulse Frequency: Min. 10 Hz @ 20 mA; Max. 999.9 Hz (rotary DIP switch selectable).
Temperature Limits: 32 to 130°F (0 to 55°C).
Output: 4 to 20 mA.
Power Requirements: 24 to 36 VDC @ 4 to 20 mA when loop powered.
Response Time: 2 to 60 s; 90% FS (depends on input averaging).
Loop Resistance: 0 to 1300 Ω max. (see instruction manual).
Enclosure Material: Die-cast powder-coated aluminum.
Enclosure Rating: NEMA 4X (IP66).
Electrical Connections: Terminal block.
Mounting: See model chart on catalog page.
Weight: 3 lb (1361 g).

Easy to set up and can be either wall or meter mounted
Takes a pulse frequency output from the compatible flow meters and converts it into a continuous 4 to 20 mA analog output signal
The frequency for the flowmeter output signal can be adjusted using four rotary switches on the back of the transmitter and a microcontroller automatically scales all other values accordingly
The microcontroller averages inputs for more stable reading outputs and is adjustable from 2 to 16 seconds
Loop powered, 2 wire connection
High environmental protection with semi-flexible urethane potted electrical components