Model 200 P 1/2" 'Industrial' ratchet

'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
More Information
Part number13055
EAN Bar Code-
NATO number-
Accuracy+/-3%
operates_between
30.0 - 150.0 lbf·ft
40.0 - 200.0 N·m
  • Length: 422 mm
  • Square Size: 1/2"
  • Weight: 0.96 Kg
  • Ratchet Teeth: 72
  • Ratchet Type: Industrial Push-Through
  • Ratchet Diameter: 42 mm
  • Setting system is designed to discourage unauthorised alteration.
  • Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
  • Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
  • Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000.
  • Available with a high quality ratchet or as a 'Torque Handle'.
  • Supplied in a moulded box for storage and protection.
  • Retained square drive will not pull out of the head when the socket is removed