All instruments purchased will be accompanied with a FREE current calibration certificate traceable to Australian - National Measurement Laboratories(NMI) regardless of quantity purchased

Hoses, Fittings and Accessories

Grid List

5Items

5 Item(s)

Set Descending Direction
  • ADDITEL 12X SERIES PRESSURE MANIFOLDS

    ADDITEL 12X SERIES PRESSURE MANIFOLDS

    Additel 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3000 psi (200bar), while the Additel 123 manifolds is compatible to hydraulic pressure applications up to 15,000 psi (1,000 bar). A filter is built-in with the 121 pneumatic pressure manifold to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold. The Additel 12X series pressure manifolds allow you to connect without the use of wrenches or Tetape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.

     

    Note: A test hose (female adapter to male adapter) is included with every Additel 12X pressure manifold.

  • ADT 103 HAND-TIGHT QUICK CONNECTORS

    ADT 103 HAND-TIGHT QUICK CONNECTORS

    ADT103-NPT
    Adapter and Fitting, 1/4″ NPT male to various female hand-tight quick connectors (10 pc).

    ADT103-BSP
    Adapter and Fitting, 1/4″BSP male to various female hand-tight quick connectors (10 pc).

    ADT103-M20
    Adapter and Fitting, M20X1.5 male to various female hand-tight quick connectors (10 pc).

    (Designed for all pumps except Additel 949 pump)

    ADT103-NPT (Hand-tight quick connectors)
    1/4NPT male to various hand-tight quick connectors (10pcs, case included)


    ADT103-BSP (Hand-tight quick connectors)
    1/4BSP male to various hand-tight quick connectors (10 pcs, case included)


    ADT103-M20 (Hand-tight quick connectors)
    M20×1.5 Male to various hand-tight quick connectors (10pcs, case included)


  • ADT 102 MALE TO VARIOUS CONNECTORS

    ADT 102 MALE TO VARIOUS CONNECTORS

    1/4NPT male to various connectors as follows (25 pcs, carrying case included)

    (Remark: 1/2” NPT male, 1/4” BSP male, M20*1.5 male are available per request)

     

  • ADT 100 SERIES FILTERS

    ADT 100 SERIES FILTERS

    The Additel 100-FLT pressure filters are designed for ease of use and low maintenance. The 100-FLT-600 is a pneumatic filter and liquid trap covering from -100 to 4000 kPa (-1 to 40 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removing dirt, moisture or contaminates. For hydraulic applications, the Additel 100-FLT-10K, hydraulic filter can be used up to 10K psi (700 bar). With a filter resolution of 0.07 mm contaminants or debris are captured in the filter which is easy to clean and maintain. Each filter is configured with a variety of pressure connections designed to meet the most common applications.
  • QUICK CONNECT HOSES AND FITTINGS

    QUICK CONNECT HOSES AND FITTINGS

    A range of calibration hoses with quick connect fittings to suit a variety or process connections including NPT threads and directly into compression fittings.

Grid List

5Items

5 Item(s)

Set Descending Direction