JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
• Model ADT680: Regular version ADT680W: Data logging and wireless version
• Pressure Type: Gauge and Compound
• Performance Accuracy: 0.05%FS, 0.1%FS or 0.25%FS Update Rate: 10 times/Sec ,3 times /Sec (default), 1 time /Sec ,1 time/15 Seconds Operating Temperate: 14°F to 122°F (-10°C to 50°C) Compensated Temperate: 14°F to 122°F (-10°C to 50°C), accuracy Guaranteed Storage Temperature: -4°F to 158°F (-20°C to 70°C) Overload Pressure: 1.2X
• Power Supply Battery: 2 x AA alkaline (LR6) batteries Recommend: Duracell MX1500, EnergizerE91, Panasonic LR6, Duracell 15AU Battery life:10/Sec:1500Hours; 3/Sec: 3,000Hours; 1/Sec: 6000Hours; 1/15Sec: 12,000Hours Rated Power: 3.0VDC I max=30mA, P max=90mW
• Material Wetted Surface: All wetted surfaces are 316L Stainless Steel with welded design for gauges <10,000 psi (no O-ring, thread tape, epoxy, or sealant on any part of the sensor assembly), and copper O-ring design for gauges > 10,000 psi. Case: PC+ABS , Protective Cover: Silicone Rubber
• Display LCD Specification: FSTN-LCD,Visual scope 36x61mm; Full 5 digits,15.2mm High; 7 segment analog bar graph scaled from 0~100% of FS Backlight: White
• Wireless Communication (ADT680W only) Wireless Frequency: 2.4G ISM Bands, 20 meter range Number of wireless Channels : Chanel 1~15 Software: Wireless network demo software for free (download on www.additel.com)
The Additel 9030 wireless dongle is one of the standard accessories for ADT680W
• Data Logging (ADT680W only) Storage Capacity: 140,000 readings(time, pressure, and temperature) Storage Interval: Adjustable from 1~9999 Sec
• Compliances Certificates:CE RTTE, FCC ID, IC ID Protection Level: IP67 Vibration: 5g(20~2000Hz) Shock resistance: 100g/11ms
• Others Dimensions: 100mm x 40mm, total height:157mm Weight: 500g Fitting: 1/4NPT male, G1/4 male, M20×1.5 male (< 15,000 psi)
• Auto off: Disabled,15, 30, 45, 60, 90, 120 Minutes optional.
• Filtering: Averaging (3 to 10 samples) or low-pass first-order filter.
• Engineering units: Pa, kPa, MPa, bar, mba, psi, kgf/cm2, mmH2O, mmHg, inH2O, inHg, ozf/in, %, °C, °F.
extend units: inH2O(20°C), inH2O(60°F), mmH2O(20°C), mmH2O(15°C), ftH2O(60°F), ftH2O(4°C)
• Backlight Duration: Not auto off,15,30,45,60 seconds optional.
• Max/Min data capture: Saves Max and Min data during pressure measurement.
• Key Lockout: When the gauge is in auto-storing mode, the front panel buttons will be automatically locked.
• Overpressure Alarm: Display will flash over 120%FS
• Battery voltage Indicator: Displays the battery life remaining. When the battery voltage is too low, the gauge will power-off automatically.
• Overpressure Record: Gauge will record max pressure data when the gauge is over pressured by 120% of FS.
• Leakage test: In leak test mode, the gauge will record beginning pressure, ending pressure, and show the difference ΔP.
• Factory Reset: Resets all settings back to factory default, except the calibration parameters.
• Warranty: 1 year
Gauge Pressure
Compound Pressure
Note: [1]. Sealed gauge pressure for above 1000 psi [2][3]. G=Gas, L=Liquid (please specify media type when place order)