Overview
The DP120 differential voltage probe is designed to make measurements on signals with a floating reference. The DP120 has two probes with shrouded banana probe tips (one each red and black) and shielded cable for improved noise immunity. Input impedance between each input to shielded BNC is 5MΩ in parallel with 6pF capacitor. Input impedance between the inputs is 10MΩ with a capacitance of 5pF

More Information

Features

Probes with shrouded banana probe tip.
AC85A large jaw alligator clips.
AC83 pin-grabber test clips.
Probe length 1.5 meters (60").
Safety 600Vrms CAT III per IEC 1010-2-031 and 1000Vrms CAT II per
IEC 1010-2-031.
One year warranty

Model

DP120 Differential Probe

Overview

The DP120 differential voltage probe is designed to make measurements on signals with a floating reference. The DP120 has two probes with shrouded banana probe tips (one each red and black) and shielded cable for improved noise immunity. Input impedance between each input to shielded BNC is 5MÎ© in parallel with 6pF capacitor. Input impedance between the inputs is 10MÎ© with a capacitance of 5pF

Includes

The DP120 differential voltage probe is designed to make measurements on signals with a floating reference. The DP120 has two probes with shrouded banana probe tips (one each red and black) and shielded cable for improved noise immunity. Input impedance between each input to shielded BNC is 5MÎ© in parallel with 6pF capacitor. Input impedance between the inputs is 10MÎ© with a capacitance of 5pF

Specifications

Maximum Input Voltage to Ground	600 Volts Rms
Maximum Differential Voltage	1000V DC or 1000Vrms or 1200V (DC + AC peak)
Output Cable Termination	BNC
Attenuation	x200 and x20
Bandwidth	DC to 20MHz (-3dB)
Accuracy	±2.5%
Rise Time	17.5ns
CMRR	x200: at 60Hz = 80dB, at 1MHz = 50dB, x20 at 60Hz = 70dB, at 1MHZ = 40dB
Safety	600V CAT III, 1000V CAT II per IEC 1010-2-031

General Specifications

Power Supply	Alkaline 9 Volt, NEDA, IEC 6LR61
Battery Life	8-hour operational, 400-hour stand-by

Specifications

Maximum Input Voltage to Ground	600 Volts Rms
Maximum Differential Voltage	1000V DC or 1000Vrms or 1200V (DC + AC peak)
Output Cable Termination	BNC
Attenuation	x200 and x20
Bandwidth	DC to 20MHz (-3dB)
Accuracy	±2.5%
Rise Time	17.5ns
CMRR	x200: at 60Hz = 80dB, at 1MHz = 50dB, x20 at 60Hz = 70dB, at 1MHZ = 40dB
Safety	600V CAT III, 1000V CAT II per IEC 1010-2-031

General Specifications

Power Supply	Alkaline 9 Volt, NEDA, IEC 6LR61
Battery Life	8-hour operational, 400-hour stand-by

Features

Probes with shrouded banana probe tip.
AC85A large jaw alligator clips.
AC83 pin-grabber test clips.
Probe length 1.5 meters (60").
Safety 600Vrms CAT III per IEC 1010-2-031 and 1000Vrms CAT II per
IEC 1010-2-031.
One year warranty