Fluke 771 mA Process Clamp Meter

Don’t break the loop on 4-20 mA signal measurements

Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.

Use the 771 to:

Measure mA signal for PLC and control system analog I/O.
Measure 4 to 20 mA output signals from transmitters without breaking the loop.
Count on best in class accuracy of 0.2%.
Measure mA signals with 0.01 mA resolution.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Don’t break the loop on 4-20 mA signal measurements

Use the 771 to:

Measure mA signal for PLC and control system analog I/O.
Measure 4 to 20 mA output signals from transmitters without breaking the loop.
Count on best in class accuracy of 0.2%.
Measure mA signals with 0.01 mA resolution.

More Information

Features

Measure mA signals for PLC and control system analog I/O.
Measure 4 to 20 mA output signals from transmitters without breaking the loop.
Best in class 0.2 % accuracy.
Resolution and sensitivity to 0.01 mA.
Hold function captures and displays changing measurements.
Dual backlit display with both mA measurement and percent of 4 to 20 mA span.
Measurement Spotlight illuminates hard to see wires in dark enclosures.
Detachable clamp with extension cable for measurements in tight locations.
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range.
Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight.

Model

Fluke Model 771 mA Process Clamp Meter

Specifications

General Specifications

Operating temperature	-10°C to 55°C
Storage Temperature	-25°C to 70°C
Operating Humidity	< 95% @ <30°C, <75% @ 30°C to 55°C
Operating Altitude	0 to 2000m
IP Rating	IP40
Size	59 (mm (W) x 38mm (D) x 212mm (L) 2.32 ins (W) x 1.5 ins (D) x 8.35 ins (L)
Weight	260g (9.1ozs)
Vibration	Random 2g, 5 to 500Hz
Shock	1 meter drop test (except the jaw)
EMI/RFI	Meets EN61326-1
Temperature Coefficient	0.01% °C
Power	Two type AA 1.5V Alkaline batteries, IEC LR6, 20 hours typical
Warranty	3-years for electronics, 1-year for clamp cable assembly

Specifications

General Specifications

Operating temperature	-10°C to 55°C
Storage Temperature	-25°C to 70°C
Operating Humidity	< 95% @ <30°C, <75% @ 30°C to 55°C
Operating Altitude	0 to 2000m
IP Rating	IP40
Size	59 (mm (W) x 38mm (D) x 212mm (L) 2.32 ins (W) x 1.5 ins (D) x 8.35 ins (L)
Weight	260g (9.1ozs)
Vibration	Random 2g, 5 to 500Hz
Shock	1 meter drop test (except the jaw)
EMI/RFI	Meets EN61326-1
Temperature Coefficient	0.01% °C
Power	Two type AA 1.5V Alkaline batteries, IEC LR6, 20 hours typical
Warranty	3-years for electronics, 1-year for clamp cable assembly

Features

Measure mA signals for PLC and control system analog I/O.
Measure 4 to 20 mA output signals from transmitters without breaking the loop.
Best in class 0.2 % accuracy.
Resolution and sensitivity to 0.01 mA.
Hold function captures and displays changing measurements.
Dual backlit display with both mA measurement and percent of 4 to 20 mA span.
Measurement Spotlight illuminates hard to see wires in dark enclosures.
Detachable clamp with extension cable for measurements in tight locations.
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range.
Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight.