JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
With True-Rms AC voltage and current measurements, the Fluke 375 Clamp Meter can be ready up to 600 volts and 600 amps in both AC and DC modes, and is capable of frequency measurements up to 500Hz. Additionally, the model 375 is compatible with the iFlex™ flexible current probe (optional), which when used with the current meter expands the current measurement to 2500 amps.
Electrical Specifications
Measurement
Range
Accuracy
AC Voltage (True-Rms)
0 to 600.0V
1.5% of reading + 5 digits
AC Current (True-Rms
0 to 600A
2.0% of reading + 5 digits
0 to 2500A
using optional iFlex™ Flexible Current Probe
DC Voltage
0 to 600V
1.0% of reading + 5 digits
0 to 500mV
Resistance
0 to 60KΩ
Capacitance
1 to 1000µF
1.0% of reading + 4 digits
Frequency
to 500Hz
iFlex Capability
Compatible with option
Continuity
≤ 30Ω
Inrush
100ms
Min / Max / Avg
Yes
Data Hold
Backlight Display
Temperature Coefficient
0.01% / °C (< 18° or > 28°)
Environmental Specifications
Operating Temperature
-10°C to 50°C
Storage Temperature
-40ºC to +60ºC
Operating Humidity
< 90% at 10°C to 30°C, < 75% at 30°C to 40°C
Operating Altitude
3000 meters
Safety Specifications
Safety Rating
IEC 1010-1-2001, 600V CAT III, CAT IV 300V
General Specifications
Jaw Opening
34mm maximum (750 MCM)
Power Supply
Two 1.5V type 'AA' Alkaline Batteries (IEC 1010-2-031)
Dimensions
248mm (L) x 85mm (W) x 45mm (D)
Weight
375g
Warranty
3-years for electronics, 1-year for cable and clamp assembly
Ordering Information
Model Name
Description
Fluke 375
AC/DC True-Rms Clamp MeterIncludes: Two type 'AA' Alkaline batteries, Coated Instruction Card, TL75 Test Leads, Safety Information Sheet, and Soft Carrying Case.
Fluke i2500-10 (optional)
iFlex™ Flexible Current Probe (2500 Amp)