JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Confidently take reliable readings with the true-rms, Fluke 353 Clamp Meter; the tool of choice for high-current measurements up to 2000 Amps. The extra-wide jaw easily clamps around large conductors typically found in high current applications. The rugged design and CAT IV 600V, CAT III 1000V ratings, add an extra element of protection when taking high-powered measurements.
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance making this the most versatile tool for utilities, electrical contractors, and industrial service technicians.
Electrical Specifications
Current measurement DC and AC 10Hz to 100Hz
Range
Resolution
Accuracy
Trigger Level for Inrush
Trigger Level for Hz Filter OFF
Trigger Level for Hz Filter ON
40A
10mA
1.5% of rdg + 15 digits
0.50A
2.50A
400A
100mA
1.5% of rdg + 5 digits
5.0A
2.5A
2000A; 1400A AC rms
1A
5A
8A
Current measurement AC 100.1Hz to 1kHz
3.5% of rdg + 15 digits
3.5% of rdg + 5 digits
Crest Factor 50/60Hz
Crest Factor
2 at 33A, 2.4 at 27A
2 at 330A, 2.4 at 270A
2 at 1000A, 2.4 at 833A
Add 2% to error spec for Crest Factor greater than 2
Voltage measurement DC and AC 10Hz to 100Hz
4V
1mV
1% of rdg + 10 digits
0.050V
40V
10mV
1% of rdg + 5 digits
0.25V
400V
100mV
6V
600V AC rms
1V
1000V DC
N/A
Voltage measurement AC 100.1Hz to 1kHz
3% of rdg + 5 digits
Note: 600V and 1000V ranges have 10% over range to 660V and 1100V respectively
Ohms measurement
400Ω
0.1Ω
4kΩ
1Ω
40kΩ
10Ω
400kΩ
100Ω
Continuity beeper
ON at ≤ 30Ω; OFF ≥ 100Ω
Frequency Measurement
Measurement Range
5.0Hz to 1kHz
0.1Hz (15Hz to 399.9Hz); 1Hz (400Hz to 1kHz)
Accuracy - 5.0Hz to 100Hz
0.2% of rdg + 2 counts
Accuracy - 100.1Hz to 1kHz
0.5% of rdg + 5 counts
Trigger Level
Refer to current tables
Environmental Specifications
Operating Temperature
0°C to +50°C
Storage Temperature
-20ºC to +60ºC
Operating Humidity
0 to 95% non Condensing
EMI, RFI, EMC
FCC part 15, IEC/EN 61326-1:1997 Class B, IEC/EN 61326:1997 3V/m, performance criteria B, EN 61325
Operating Altitude
2000 meters
Storage Altitude
10,000 meters
Drop Test Requirements
1 meter
Temperature Coefficients
0.1% of reading per ºC outside 22ºC to 24ºC
Safety Specifications
Overvoltage Category
600V CAT IV, 1000V CAT III
Safety Compliance
IEC 61010-2-032
IP Rating
42 (indoor use only)
General Specifications
Jaw Opening
58mm (2.28 ins)
Power Supply
Six 1.5V type 'AA' NEDA 15A, or IEC LR6 Batteries
Battery Life (typical usage backlight off)
100 hours
Test Leads
Rated to 1000V
Dimensions
300mm (L) x 98mm (W) x 52mm (D)
Weight
.814kg (1.8 lb)
Warranty
Two years
Ordering Information
Model Name
Description
Fluke 355
AC/DC True-Rms Clamp Meter, 2000A Includes: C43 soft carrying case, 6 type 'AA' batteries, TL224 silicone rubber Test Leads (1.5m), Tp2 Test Probes, AC285 Alligator Clips, and User's manual