Series 200 & 300 Durablock® Solid Plastic Stationary Gage

Durablock® Solid Plastic Stationary Gage Suitable for Total Pressures Up to 100 psig, Temperatures Up to 150°F, Accuracy ±2% of Full Scale (1% on Models 215, 244, 246 Only)

Suitable for Total Pressures Up to 100 psig, Temperatures Up to 150°F, Accuracy ±2% of Full Scale (1% on Models 215, 244, 246 Only)

Dwyer® SERIES 200 & 300 solid plastic stationary gages, or draft gages, are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer's years of experience in the fabrications of acrylic instruments.

Click here, if you require a Safety Data Sheet for the Red Gage Fluid.

Product Applications

  • Low pressure laboratory and industrial service applications
More Information
Model Chart
EXAMPLE 200 B Series 200 Durablock® Solid Plastic Stationary Gage, inclined, range 0.1-0-1" w.c., with type B connections.
MANOMETER TYPE 200
200.5
201
202
202.5
209
215
244
246
300
306
308
310
M200
M200.5
M201
M202
M202.5
M209
M215
M246
M300
M306
M308
M310
  Inclined, 0.1-0-1" w.c.
Inclined, 0.1-0-1" w.c.
Inclined, .05-0.5" w.c.
Inclined, 0.2-0-2" w.c.
Inclined, 0.2-0-2" w.c.
Inclined, 0.2-0-3" w.c.
Inclined, 0 .05-0-0.25" w.c.
Inclined, 0-4" w.c.
Inclined, 0-6" w.c.
Vertical, 0-4" w.c.
Vertical, 0-6" w.c.
Vertical, 0-8" w.c.
Vertical, 0-10" w.c.
Inclined, 3-0-25 mm w.c.
Inclined, 3-0-25 mm w.c.
Inclined, 0-15 mm w.c.
Inclined, 5-0-50 mm w.c.
Inclined, 5-0-50 mm w.c.
Inclined, 5-0-75 mm w.c.
Inclined, 2-0-6 mm w.c.
Inclined, 0-150 mm w.c.
Vertical, 0-11 cm w.c.
Vertical, 0-16.4 cm w.c.
Vertical, 0-21.6 cm w.c.
Vertical, 0-25 cm w.c.
OPTIONS   B
C
D
E
AT
NIST
Type B Connections
Type C Connections
Type D Connections
Type E Connections
Aluminum Tag
NIST Calibration
  • 1" Thick Acrylic Plastic Body is a solid block, virtually unbreakable, stable and free of the danger of distortion.
  • Drilled Bore Accurate to ±.0002" free of bends or crooks, will not require recalibration because of distortion.
  • Selected Gage Fluid with high wetability characteristics forms a consistent, well shaped meniscus for most accurate readability.
  • Adjustable Reflective Polished Aluminum Scales with thumbscrew locking for easy zeroing.
  • Parallax-Free Reading for maximum accuracy and consistency is achieved by simply aligning the meniscus with its image reflected in the scale.
  • Over-Pressure Safety Traps prevent loss of fluid due to over range pressures or surges in pressure. (Not required on No. 215.)
  • Leveling Adjustment for inclined style gages is achieved by simply loosening a locking thumb screw on the side or bottom of the gage, adjusting with reference to the integral sensitive ground glass bubble level and retightening.
  • Heavy Gage Steel Mounting Panels are gray hammerloid finished.
  • Precision Built assures device meets the highest standards