Toggle Nav
Search
CALL US
OUR LOCATIONS
Login
Cart 0
  • info@hkcalibrations.com.au
    • Menu
    Account

    Series SX3 Ultrasonic Flowmeter Detector

    Ultrasonic Flowmeter Detector
    Quick and Easy Mounting

    Enquire
    Email Print this Page
    Get A Quote To Calibrate This Device
    Series SX3 Ultrasonic Flowmeter Detector

    Quick and Easy Mounting

    Series SX3 Ultrasonic Flowmeter Detectors are paired with Series UXF2 converters and employ a clamp-on type design for permanent use based on transit time measuring method. These detectors are ideal for clean liquids containing no air bubbles such as pure water. The easy-to-use compact and lightweight design is intended for integration into mechanical devices. It is applicable for small to medium size pipes of diameter range from 1 to 23" (25 to 600 mm) and provides superior cost performance.

    Product Applications

    • Helps ensure pumping efficiency.
    • Provides accurate leak detection.
    • Not influenced by fluid's temperature or pressure.
     
    Service: Clean liquids that pass ultrasound and do not contain air bubbles (such as pure water and chemical solution).
    Turbidity: 10000 deg (mg/L) or less.
    Type of Flow: Well-developed turbulent or laminar flow in a fluid-filled pipe.
    Permissible Air Volume Rate: Up to 2% at 1 m/s (inversely proportional to velocity).
    Range: 0 to ±32.8 fps (0 to ±10 m/s).
    Flow Pipe Sizes: SX3A: 0.98 to 3.94 in (25 to 100 mm) for plastic piping 1.97 to 3.94 in (50 to 100 mm) for metal piping; SX3B: 1.97 to 8.86 in (50 to 225 mm); SX3C: 1.97 to 11.81 in (50 to 300 mm); SX3D: 11.81 to 23.62 in (300 to 600 mm).
    Accuracy: 1.5 to 2% of rate.
    Response Time: System cycle: 0.2s, Dead time: 0.2s or less, Time constant: 0.1s.
    Temperature Limits: Ambient -4 to 140°F (-20 to 60°C). Fluid Temperature: SX3A/SX3B: -4 to 212°F (-20 to 100°C); SX3C/SX3D w/ silicone rubber for acoustic couplant: -4 to 176°F (-20 to 80°C), w/ silicone free grease for acoustic couplant: 32 to 140°F (0 to 60°C).
    Enclosure Rating: SX3A and SX3B: IP65 (Jetproof) when using waterproof BNC connector. SX3C and SX3D: IP67 (Immersion-proof) when the terminal block is filled with silicone rubber after wiring.
    Materials: For SX3A and SX3B: Plastic PBT for sensor housing, 304SS for guide frame. For SX3C and SX3D: Plastic PBT for sensor housing, 304SS for sensor cover, 304SS and PBT for guide rail.
    Electrical Connection: Coaxial cable up to 98.4 ft (30 m) and thermal stability of 212°F (100°C).
    Mounting: Clamped on pipe surface.
    Weight: SX3A: 10.6 oz (0.3 kg), SX3B: 14.1 oz (0.4 kg), SX3C: 2.2 lb (1 kg), SX3D: 14.1 oz (0.4 kg).
    • Helps ensure pumping efficiency
    • Provides accurate leak detection
    • Not influenced by fluid’s temperature or pressure