Australia wide calibration scopeISO 9001-2015
The CNX v3000 Wireless Voltage Module is part of the Fluke team of wireless troubleshooting tools.
Connect the CNX v3000 AC Wireless Voltage Module to your test point, and view the results up to 20 meters away on the CNX 3000 Wireless Multimeter. You'll save time, with less run-around collecting multiple measurements. Plus, no more writing down data as the CNX 3000 captures up to 65,000 sets of time stamped min/max/avg readings.
CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm's way.
The CNX v3000 AC Wireless Voltage Module provides:
The CNX wireless system can track up to 10 measurement modules simultaneously, with results sent to a PC for detailed analysis.
Accuracy is specified as ±(% of reading + number of least significant digits). All ranges are autoranging. Accuracy is specified from 5% to 100% of the range obtained by autoranging, from 18°C to 28°C.
Range Note 1.
45Hz to 500Hz
500Hz to 1kHz
±(1.0% of reading + 3 lsd)
±(2.0% of reading + 3 lsd)
-10°C to 50°C
90% at 35°C, 75% at 40°C, 45% at 50°C
0.1 x(specified accuracy/°C (< 18°C or > 28°C)
-40°C to 60°C
EN/IEC 61010-1:2010 CAT III 1000V, and CAT IV 600V, EN/IEC 61010-2-030:2010,EN/IEC 61010-031:2002, EN/IEC 61010-2-032:2002
CAT IV 600V, CAT III 1000V
CSA, FCC T68-FWCS IC:6627A-FWCS
Ingress Protection Rating
3-1/2 digit, 6000 counts, Liquid Crystal Display with backlight
Record up to 65,000 readings
Unbound Listen Interval
2.42 GHz, ISM Band
RF Signal Range
Two (2) type 'AA' Alkaline batteries; NEDA 15A, IEC LR6
16.5cm (L) x 6.35cm (W) x 3.56cm (D)
.22kg (8 oz)