Australia wide calibration scopeISO 9001-2015
The CNX i3000 iFlex Wireless Current Module is part of the Fluke team of wireless troubleshooting tools
Connect the CNX i3000 AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the CNX 3000 Wireless Multimeter. You'll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems. Or use a stand alone measurement tool or combine with other CNX modules through closed electrical panels. Plus, no more writing down data as the CNX a3000 Current Module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter.
CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm's way.
The CNX i3000 iFlex AC Wireless Current Module has all the essentials to help you conveniently take current measurements.
The CNX wireless system can track up to 10 measurement modules simultaneously, with results sent to a PC for detailed analysis.
3-1/2 digit, Liquid Crystal Display with backlight
0 to 2500.0 Amps AC
±(2% of reading ± 5 digits)
Crest Factor (50/60Hz)
3.0 at 1100A, 2.5 at 1400A, 1.42 at 2500A, add 2% for C.F. > 2
maximum displayed reading: 999.9A
1 second minimum/adjustable by PC or front panel
Record up to 65,000 readings
Unbound Listen Interval
2.4GHz, ISM Band
RF Signal Range
-10°C to 50°C
90% at 35°C, 75% at 40°C, 45% at 50°C
0.1 x(specified accuracy/°C (< 18°C or > 28°C)
-40°C to 60°C
EN/IEC 61010-1:2010 CAT III 1000V, and CAT IV 600V, EN/IEC 61010-2-030:2010,EN/IEC 61010-031:2002, EN/IEC 61010-2-032:2002
CAT IV 600V, CAT III 1000V
CSA, FCC T68-FWCS IC:6627A-FWCS
Ingress Protection Rating
Two (2) type 'AA' Alkaline batteries; NEDA 15A, IEC LR6
16.5cm (L) x 6.35cm (W) x 3.56cm (D)
.22kg (8 oz)