Fluke 902 True-Rms HVAC Clamp Meter

The Fluke 902 True RMS HVAC Clamp Meter provides the accuracy, reliability and ruggedness that defines Fluke test tools. It is designed for HVAC technicians for the systems they service and install daily. With True RMS technology and a CAT III 600V rating, HVAC technicians can troubleshoot and maintain HVAC equipment safely and with confidence in the results.

Use the Fluke 902 to get more done:

  • Capture flue gas temperatures.
  • Conduct flame rod testing.
  • Measure start and run motor capacitors.
  • Measure supply side current and voltage as well as load side current and voltage.
  • Measure current and voltage phase balance on 3 phase systems.
  • Troubleshoot compressor electrical motor faults.
  • Measure performance of variable frequency drives.

The Fluke 902 True RMS HVAC Clamp Meter provides the accuracy, reliability and ruggedness that defines Fluke test tools. It is designed for HVAC technicians for the systems they service and install daily. With True RMS technology and a CAT III 600V rating, HVAC technicians can troubleshoot and maintain HVAC equipment safely and with confidence in the results.

Use the Fluke 902 to get more done:

  • Capture flue gas temperatures.
  • Conduct flame rod testing.
  • Measure start and run motor capacitors.
  • Measure supply side current and voltage as well as load side current and voltage.
  • Measure current and voltage phase balance on 3 phase systems.
  • Troubleshoot compressor electrical motor faults.
  • Measure performance of variable frequency drives.
More Information
Features
  • Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements.
  • AC/DC Voltage measurements to 600V.
  • AC Current measurement to 600A.
  • Small body and jaws fit perfectly in your hand and into tight places.
  • Handy 'Display Hold' button keeps measurements on the display.
  • Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch).
  • Large, backlit display is easy-to-see in less than ideal conditions.
  • Auto shut-off maximizes battery life so the meter works when you need it.
  • CAT III 600V rating.
  • Three year warranty.
Model Fluke Model 902 True-Rms HVAC Clamp Meter
Description Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 773 Milliamp Clamp Meter is Fluke's premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power.
Specifications

Electrical Specifications

Measurement

Range

Accuracy

AC Voltage (True-Rms)

0 to 1000.0V

1.5% of reading + 5 digits

AC Current (True-Rms

0 to 999.9A

2.0% of reading + 5 digits

0 to 2500A

using iFlex™ Flexible Current Probe

DC Voltage

0 to 1000V

1.0% of reading + 5 digits

DC Current

0 to 999.9A

1.0% of reading + 5 digits

Resistance

0 to 60KΩ

1.0% of reading + 5 digits

Temperature

-10°C to 400°C

1.5% of reading + 5 digits

-40°C to -10°

±5.0% + 1.5°C

Capacitance

1 to 1000µF

1.9% of reading ± 2 digits

Continuity

≤ 30Ω

 

Environmental Specifications

Operating Temperature

-10°C to 50°C

Storage Temperature

-40ºC to +60ºC

Operating Humidity

< 90% at 10°C to 30°C, < 75% at 30°C to 40°C

Operating Altitude

2000 meters

 

Safety Specifications

Safety Rating

CAT III 600V

 

General Specifications

Jaw Opening

34mm maximum (750 MCM)

Power Supply

Two 1.5V  type 'AA' Alkaline Batteries

Dimensions

273mm (L) x 108mm (W) x 62mm (D)

Weight

7kg

Warranty

1-years

 

Ordering Information

Model Name

Description

Fluke 902

True-Rms HVAC Clamp Meter
Includes: 
Two type 'AA' Alkaline batteries, Coated Instruction Card, TL75 Test Leads, User's manual/Safety Information, 80BK temperature probe and Soft Carrying Case.

Electrical Specifications

Measurement

Range

Accuracy

AC Voltage (True-Rms)

0 to 1000.0V

1.5% of reading + 5 digits

AC Current (True-Rms

0 to 999.9A

2.0% of reading + 5 digits

0 to 2500A

using iFlex™ Flexible Current Probe

DC Voltage

0 to 1000V

1.0% of reading + 5 digits

DC Current

0 to 999.9A

1.0% of reading + 5 digits

Resistance

0 to 60KΩ

1.0% of reading + 5 digits

Temperature

-10°C to 400°C

1.5% of reading + 5 digits

-40°C to -10°

±5.0% + 1.5°C

Capacitance

1 to 1000µF

1.9% of reading ± 2 digits

Continuity

≤ 30Ω

 

Environmental Specifications

Operating Temperature

-10°C to 50°C

Storage Temperature

-40ºC to +60ºC

Operating Humidity

< 90% at 10°C to 30°C, < 75% at 30°C to 40°C

Operating Altitude

2000 meters

 

Safety Specifications

Safety Rating

CAT III 600V

 

General Specifications

Jaw Opening

34mm maximum (750 MCM)

Power Supply

Two 1.5V  type 'AA' Alkaline Batteries

Dimensions

273mm (L) x 108mm (W) x 62mm (D)

Weight

7kg

Warranty

1-years

 

Ordering Information

Model Name

Description

Fluke 902

True-Rms HVAC Clamp Meter
Includes: 
Two type 'AA' Alkaline batteries, Coated Instruction Card, TL75 Test Leads, User's manual/Safety Information, 80BK temperature probe and Soft Carrying Case.

  • Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements.
  • AC/DC Voltage measurements to 600V.
  • AC Current measurement to 600A.
  • Small body and jaws fit perfectly in your hand and into tight places.
  • Handy 'Display Hold' button keeps measurements on the display.
  • Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch).
  • Large, backlit display is easy-to-see in less than ideal conditions.
  • Auto shut-off maximizes battery life so the meter works when you need it.
  • CAT III 600V rating.
  • Three year warranty.