Australia wide calibration scopeISO 9001-2015
VoltAlert™ ac voltage tester from Fluke is easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.
Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bar conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage Sensing Ranges
Nominally, 90V AC to 1000V AC or 200V AC to 1000V AC depending on model, 45Hz to 405Hz, also a 20V to 90V circuit model.
Detector Tip Style
Blade or round, depending on model.
One high intensity red LED.
c CSA us, CE, TUV, C-Tick.
1000V, CAT IV.
-10°C to 50°C
Operating Humidity Range
0% to 90% (0°C to 30°C)0% to 75% (30°C to 40°C)0% to 45% (40°C to 55°C)
Two 'AAA' Alkaline batteries included
Fluke VoltAlert™ Voltage detector. (90Vac to 1000Vac)