Australia wide calibration scopeISO 9001-2015
Earth Ground loop resistance measurements for commercial, industrial, and utility applications
The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display hold’ and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.
Stakeless testing systemThe Fluke 1630 uses the Stakeless testing method, which eliminates the need to disconnect parallel ground rods and find suitable locations for placing auxiliary ground stakes. This saves time and enables users such as industrial and utility electricians, and field service electricians and contractors, to perform earth ground loop tests in locations where it is not possible to use other techniques, including inside buildings or on power pylons. With the Stakeless testing method, earth ground stakes are no longer necessary. The Fluke 1630 Earth Ground Clamp is placed around the earth ground rod or the connecting cable. A known voltage is induced by one half of the clamp and the current is measured by the other half. The tester automatically determines the ground loop resistance at this grounding connection.
Ground Loop Resistance (Autorange)
0.025Ω to 0.250Ω
±1.5% of reading ±0.02Ω
0.250Ω to 9.999Ω
±1.5% of reading ±0.05Ω
10.00Ω to 99.99Ω
±2.0% of reading ±0.3Ω
100.0Ω to 199.9Ω
±3.0% of reading ±1.0Ω
200.0Ω to 400.0Ω
±5.0% of reading ±5Ω
400.0Ω to 600.0Ω
±10% of reading ±10Ω
600.0Ω to 1500Ω
Note: loop resistance with no inductance, external magnetic field <50A/m, external electrical field <1V/m, conductor centered
999 digital LC display with special symbols
'OL' on display
Low Battery Indication
Refers to the operating temperature range and is guaranteed for two years
-20°C to 60°C (-4°F to 140°F)
23°C ±5°C (73°F ±9°F)
< 75% R.H.
< 85% R.H.
IEC 1000 4-2, IEC 61326-1 Class B
IEC 61000-4-2, 8kV (air) criteria AIEC 61000-4-3, 3V/m performance criteria A
300V, CAT III pollution degree 2 IEC 61010-1 and IEC 61010-2-032
IP30 according to IEC 529/EN 60529
35mm (1.38") approx.
9-volt Alkaline, IEC 6 LR61, battery
> 8 hours continuous operation
276mm (L) x 100mm (W) x 47mm (D)