Model 60 P 3/8" 'Industrial' ratchet

'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
More Information
Part number 13051
EAN Bar Code -
NATO number -
Accuracy +/-3%
operates_between
500.0 - 900.0 lbf·in
5.0 - 45.0 lbf·ft
8.0 - 60.0 N·m
1.0 - 6.0 kgf·m
  • Length: 291 mm
  • Square Size: 3/8"
  • Weight: 0.62 Kg
  • Ratchet Teeth: 72
  • Ratchet Type: Industrial Push-Through
  • Ratchet Diameter: 35 mm
  • Setting system is designed to discourage unauthorised alteration.
  • Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
  • Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
  • Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000.
  • Available with a high quality ratchet or as a 'Torque Handle'.
  • Retained square drive will not pull out of the head when the socket is removed.
  • Supplied in a moulded box for storage and protection.