Fluke 1AC-II VoltAlert™ Voltage Detector

VoltAlert™ ac voltage tester from Fluke is easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

VoltAlert™ ac voltage tester from Fluke is easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

More Information
Features
  • Detects control voltage from 90VAC to 1000VAC.
  • Fits in a shirt pocket for convenience.
  • All outer surfaces are non-conductive for safety.
  • Detects voltage without metallic contact.
  • Manufactured, printed and packaged in the US.
  • Quickly locates the hot, neutral and ground terminals in any receptacle.
  • 1-year warranty.
Model Fluke Model 1AC-II VoltAlert™ Voltage Detector
Overview VoltAlertâ
Specifications

Specifications

Operating Principle

 

Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bar conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage Sensing Ranges

Nominally, 90V AC to 1000V AC or 200V AC to 1000V AC depending on model, 45Hz to 405Hz, also a 20V to 90V circuit model.

Detector Tip Style

Blade or round, depending on model.

Light Source

One high intensity red LED.

Agency Approvals

c CSA us, CE, TUV, C-Tick.

Safety Rating

1000V, CAT IV.

IP Rating

IP40

Operating Temperature

-10°C to 50°C

Operating Humidity Range

0% to 90% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C)

Operating Altitude

3000 meters

Batteries

Two 'AAA' Alkaline batteries included

 
Note: Product does not respond to random electrostatic discharge.
 

Ordering Information

Model Name

Description

Fluke 1AC-II

Fluke VoltAlert Voltage detector. (90Vac to 1000Vac)

Specifications

Operating Principle

 

Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bar conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage Sensing Ranges

Nominally, 90V AC to 1000V AC or 200V AC to 1000V AC depending on model, 45Hz to 405Hz, also a 20V to 90V circuit model.

Detector Tip Style

Blade or round, depending on model.

Light Source

One high intensity red LED.

Agency Approvals

c CSA us, CE, TUV, C-Tick.

Safety Rating

1000V, CAT IV.

IP Rating

IP40

Operating Temperature

-10°C to 50°C

Operating Humidity Range

0% to 90% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C)

Operating Altitude

3000 meters

Batteries

Two 'AAA' Alkaline batteries included

 
Note: Product does not respond to random electrostatic discharge.
 

Ordering Information

Model Name

Description

Fluke 1AC-II

Fluke VoltAlert Voltage detector. (90Vac to 1000Vac)

  • Detects control voltage from 90VAC to 1000VAC.
  • Fits in a shirt pocket for convenience.
  • All outer surfaces are non-conductive for safety.
  • Detects voltage without metallic contact.
  • Manufactured, printed and packaged in the US.
  • Quickly locates the hot, neutral and ground terminals in any receptacle.
  • 1-year warranty.