Confidently take reliable readings with the true-rms, Fluke 353 Clamp Meter; the tool of choice for high-current measurements up to 2000 Amps. The extra-wide jaw easily clamps around large conductors typically found in high current applications. The rugged design and CAT IV 600V, CAT III 1000V ratings, add an extra element of protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. This is a versatile tool for utilities, electrical contractors, and industrial service technicians.

More Information

Features

Reliably handle a wide range of high-current applications with
2000A ac + dc true-rms, 1400A ac and 2000A dc.
The large 58mm (2.3 in) jaw capacity is suitable for large or multiple conductors.
In-rush current measurement captures 'power-on' surge current with accuracy and repeatability.
Accurately measure frequency up to 1kHz for optimum troubleshooting.
Quickly analyze readings using the MIN, MAX, and AVG functions.
A large backlight display allows for easy visibility in low-lit areas.
Use the display hold feature to capture readings even when the display cannot be viewed.
Use the low-pass filter to smooth out noisy loads and stabilize readings.
CAT IV 600V, CAT III 1000V rating for added user protection.

Model

Fluke Model 353 AC/DC True-Rms 2000 Amp Clamp Meter

Specifications

Electrical Specifications

Current measurement DC and AC 10Hz to 100Hz

Range	Resolution	Accuracy	Trigger Level for Inrush	Trigger Level for Hz Filter OFF	Trigger Level for Hz Filter ON
40A	10mA	1.5% of rdg + 15 digits	0.50A	2.50A	0.50A
400A	100mA	1.5% of rdg + 5 digits	5.0A	2.5A	2.5A
2000A; 1400A AC rms	1A	1.5% of rdg + 5 digits	5A	8A	8A

Current measurement AC 100.1Hz to 1kHz

Range	Resolution	Accuracy	Trigger Level for Inrush	Trigger Level for Hz Filter OFF	Trigger Level for Hz Filter ON
40A	10mA	3.5% of rdg + 15 digits	0.50A	2.50A	0.50A
400A	100mA	3.5% of rdg + 5 digits	5.0A	2.5A	2.5A
2000A; 1400A AC rms	1A	3.5% of rdg + 5 digits	5A	8A	8A

Crest Factor 50/60Hz

Range	Crest Factor
40A	2 at 33A, 2.4 at 27A
400A	2 at 330A, 2.4 at 270A
2000A; 1400A AC rms	2 at 1000A, 2.4 at 833A

Add 2% to error spec for Crest Factor greater than 2

Frequency Measurement

Measurement Range	5.0Hz to 1kHz
Resolution	0.1Hz (15Hz to 399.9Hz); 1Hz (400Hz to 1kHz)
Accuracy - 5.0Hz to 100Hz	0.2% of rdg + 2 counts
Accuracy - 100.1Hz to 1kHz	0.5% of rdg + 5 counts
Trigger Level	Refer to current tables

Environmental Specifications

Operating Temperature	0°C to +50°C
Storage Temperature	-20ºC to +60ºC
Operating Humidity	0 to 95% non Condensing
EMI, RFI, EMC	FCC part 15, IEC/EN 61326-1:1997 Class B, IEC/EN 61326:1997 3V/m, performance criteria B, EN 61325
Operating Altitude	2000 meters
Storage Altitude	10,000 meters
Drop Test Requirements	1 meter
Temperature Coefficients	0.1% of reading per ºC outside 22ºC to 24ºC

Safety Specifications

Overvoltage Category	600V CAT IV, 1000V CAT III
Safety Compliance	IEC 61010-2-032
IP Rating	42 (indoor use only)

General Specifications

Jaw Opening	58mm (2.28 ins)
Power Supply	Six 1.5V type 'AA' NEDA 15A, or IEC LR6 Batteries
Battery Life (typical usage backlight off)	100 hours
Dimensions	300mm (L) x 98mm (W) x 52mm (D)
Weight	.814kg
Warranty	Two years

Ordering Information

Model Name	Description
Fluke 353	AC/DC True-Rms Clamp Meter, 2000A Includes: C43 soft carrying case, 6 type 'AA' batteries, and User's manual